Friday, 25 June 2010
Another Big Build Firday
Another big day working on the build and it started with the remaining left wing skin prep deburring the edges and dealing with a small dent in one of the skins! Not sure I did this but its only minor and will be under the left wing so I can live with it and to be honest once I put some primer on the inside skin it wasn't quite as visible. I also created my first AD470 rivet with a smiley face!
After the wing skins were sorted it was time to rivet up four flaperon brackets, two flaperon hinges (which I did twice cause I wasn't happy with them) and rivet various other parts to each other - Plenty of photos on my website
Tomorrow I will start the wing build proper after my IMC lesson bringing the left spar up on to the work bench all 15ft of it! Then's it's time to attach the various ribs, stall warner and finally the wing skins themselves. I also need to finish the wing stand and get my fireman's hose from John my flying instructor to do this as the wings will have to live outside until final assembly as space if limited in the workshop although once the fuselage is together I might be able to find some room inside. I'm also considering what kit next if all goes to plan and think finish kit is next followed by engine and lastly avionics as I'd like to take advantage of the latest offerings from Vans.